We have been asked a lot over the years if we could make a Guitar Pickup Winding machine that will wind more than one pickup. The Quad Guitar Pickup Winder is what we have came up with that will allow four pickups to be wound together at the same time. You can see the CAD
Read MoreFor Customers that have purchased more than one of our Coil Winding Machines, they have always had to have a dedicated computer for each machine. On 1st July 2020 we have released a test version of the software that will now allow multiple machines to run from a single computer and more information can be
Read MoreWe have now updated the website with a FAQ for the CNC Guitar Pickup Mini Coil Winding Machine. http://www.ukcnc.net/index.php/faq-cnc-guitar-pickup-mini-coil-winding-machine/
Read MoreWe have now setup a dedicated domain for the Automated BVM at http://automatedbvm.net/ There are few more details on the machine and the CAD renders of what the actual prototype will look like. Not as pretty as the original concept, but workable. Also the inside of the machine is shown with working mechanics and minimal components
Read MoreCoronavirus (Covid-19) Update. We are still open and up and running this end dispatching orders. Being a small family run business and because our workshop is not open to the public, we are more than happy to keep the business running for the moment. Also at the beginning of last week, we released a concept idea of
Read MoreWe now have the New CNC D-500 Routing Machine In Stock. Please check out the product page for more information.
Read MoreWe now have the new 6-Axis dual Mach3/GRBL Controller in stock. Full details can be found on the link below 6-Axis CNC Controller
Read MoreWe are now able to offer the Dual Bobbin Motors option for our popular 200mm Coil Winding Machine. More information can be found on the product page http://www.ukcnc.net/index.php/products/200mm-coil-winder/ Or on our online shop https://ukcnc.net/index.php?route=product/product&path=62&product_id=52
Read More1st April 2019 New Software Version 1.9 and Firmware 1.8 released today for the 200mm Coil Winders and Mini Coil Winders that have the new ARM Controller MKII fitted.. As usual it can be downloaded from our site: http://www.ukcnc.net/index.php/downloads/ Software Version1.9 and firmware V1.8 changes Absolute Scripting fix where some commands were not stored correctly
Read More