Design and Manufacturer of CNC Machines & Coil Winding Machines.
News
New Firmware version 5.3 released for the Pulse Train Hat.
New Firmware version 5.3 released for the Pulse Train Hat. Full details at http://www.pthat.com
Read MorePulse Train Hat gets shortlisted for the South West Digital Awards
CNC Design Ltd gets shortlisted for the South West Digital Awards. Our Pulse Train Hat Controller has made it through to the Hardware of the Year category 🙂 https://helmsquared.com/awards/shortlist/
Read MoreGuitar Pickup Mini Coil Winders back in stock
The Mini Coil Winders are now back in stock.
Read MoreCoil Winder Tensioners back in stock May 2018.
21st May 2018 We now have all 4 sizes of the Coil Winder Magnetic Tensioners back in stock. MTCS covering wire sizes 0.04mm—0.14mm 10g—120g MTCM covering wire sizes 0.08mm—0.25mm 50g—400g MTCL covering wire sizes 0.12mm—0.35mm 80g—600g MTCLL covering wire sizes 0.14mm-0.40mm 100g-800g These can be found on the online shop and also selected as a
Read MoreSpool Cone Kits now in stock
We now have Spool Cone Kits available on our shop. https://ukcnc.net/index.php?route=product/product&path=60&product_id=178 If you are mounting spools on the top bar of the 200mm Coil Winder, then a Spool Cone Kit is available to stop back run once the winding has completed. These neat cones have needle bearings press fitted into them and fit perfectly on the 10mm
Read MoreHarvesting Robots Project
CNC Design is pleased to be involved with the University of Plymouth and the Fieldwork Robotics Harvesting Robot. https://www.plymouth.ac.uk/news/scientists-develop-harvesting-robots-that-could-revolutionise-farming-practices
Read More200mm Coil Winding Machines back in stock April 2018.
We now have the next batch of 200mm Coil Winders finished and back in stock ! Please check out the product page for more information: http://www.ukcnc.net/index.php/products/200mm-coil-winder/
Read MoreGRBL Breakout/Shield back in stock January 2018
We now have the popular GRBL Breakout/Shield for Arduino Uno CNC Controller Kits back in stock. Please check the product page for more details http://www.ukcnc.net/index.php/products/motion-controllers/ Or the Online shop https://ukcnc.net/index.php?route=product/product&path=69&product_id=139
Read MoreNew Model MK4 of the Guitar Pickup Mini Coil Winder released.
January 2018 New Model MK4 of the Guitar Pickup Mini Coil Winder released. ****Now in stock**** The Guitar Pickup Mini Coil Winder MK4 comes fitted with the new Arm Controller MKII which has some new exciting features and is housed in a sleek new aluminium controller box. Please check the link below for full details.
Read MoreChristmas and New Year Closing dates
We will be closing down for the festive break starting at the end of day 22nd December 2017 and back in on the 2nd/3rd January 2018, depending on how hung over we are 🙂 Have a Great Christmas and New Year that end to all our customers and thanks for the support in 2017. Also
Read More