How to Install Porcelain wire guide pulley kit for Mini Coil Winder
Answer: Replacing the felt pads for the pulley kit is recommended if using a tensioner.
To install follow the pictures below
The pulley can be left to free wheel or a extra washer can be placed the bold head side to fix the wheel in place and let the wire slip over the Porcelain on the pulley.
Click on pictures below to zoom in.
Above shows the existing felt pad assembly. This needs to be removed.
Remove the assembly as shown above.
Now insert the bolt, pulley and spacer as shown above.
Attach the washer and the nut to the left hand side.
This will now allow free movement of the pulley.
If you find you want a more rigid setup then you can also fix the pulley in place and let the wire slip over the Porcelain on the pulley.