Mini coil winding machine mk4

Click the button below for more information about the Guitar pickup Mini coil winding machine MK6.

View our latest model

Latest software and firmware

When upgrading your Firmware to Version 2.1 upwards on the MKII controller You must also remove the two jumpers shown in the picture below from the controller board and leave them off .

Other downloads

Icon

Bobbin Plate DXF v1 173.67 KB January 23, 2024

Download
Icon

ARM Controller MKII Software Manual v1.3 4.71 MB January 11, 2023

Download
Icon

Mini Coil Winder MK4 – Firmware Upgrade JTAG Instructions v1.2 766.99 KB July 1, 2021

Download
Icon

CNC Mini Coil Winder MK4 – Machine Setup Manual v1.0 766.99 KB January 1, 2018

Download

    UWP Software

    For more information and the UWP downloads section follow the link below.

    UWP Software Downloads

    Archived Software and firmware

    Icon

    CNC Coil Winder ARM MKII v5.7 with Firmware V2.6 27 MB April 12, 2024

    Download
    Icon

    CNC Coil Winder ARM MKII v5.6 with Firmware V2.5 27 MB March 8, 2024

    Download
    Icon

    CNC Coil Winder ARM MKII v5.2 with Firmware V2.4 27 MB October 5, 2023

    Download
    Icon

    CNC Coil Winder ARM MKIII v5.1 with Firmware V2.3 27.51 MB May 5, 2023

    Download
    Icon

    CNC Coil Winder ARM MKII v5.0 with Firmware V2.3 10.51 MB January 11, 2023

    Download
    Icon

    CNC Coil Winder ARM MKII v4.7 with Firmware V2.3 10.51 MB September 2, 2022

    Download
    Icon

    CNC Coil Winder ARM MKII v3.1 with Firmware V2.1 10.51 MB November 30, 2020

    Download
    Icon

    CNC Coil Winder ARM MKII V2.6 with Firmware V1.9 10.51 MB July 4, 2020

    Download
    Icon

    CNC Coil Winder ARM MKII v2.3 with Firmware V1.8 10.51 MB June 24, 2020

    Download
    Icon

    CNC Coil Winder ARM MKII v2.1 with Firmware V1.8 10.51 MB June 8, 2020

    Download